Hello, we use your company's access control products. After using the normal command to add the cards, swipe card to open the door, prompt the invalid card.

The instructions are as follows: add the card number 0x1B625A, which is read after swiping card, and the decimal system is 1794650, which is also read by factory test software. The card number is ok.

7E 4D 43 2D 35 38 31 32 52 31 37 30 32 30 32 34 33 FF FF FF FF 00 00 3D 6C 07 04 00 00 00 00 25 00 00 00 01 00 00 1B 6 2 5A FF FF FF FF 99 12 31 23 59 01 01 01 01 FF FF 0F 00 00 00 00 00 FF FF FF FF FF FF FF 7D 7E

~ SNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSNSN PwdPwdPwd PackNoPackNo 07 04 00 Len0x25

1 card no. 0x1B625A no password 209912312359 the four doors are the privilege of the 1 time zone and the privilege can open 4 doors common cards no holiday choices

Return code:

7E 00 00 3D 6C 4D 43 2D 35 38 31 32 52 31 37 30 32 30 32 34 33 FF FF FF FF 21 01 00 00 00 00 00 39 7E 21 01 00

Indicates that the instruction is executed normally.

However, swipe card, indicating invalid card if use the manufacturer test software to authorize, it will become the first card, also can not open the door.

Please help me to solve it. What's wrong? Thank you. Urgent.

Hello, thanks for using our access control products

For the above questions about your secondary development, after our analysis, the error is as follows: 

Problem 01 in the code: Authorized valid no more than 2089. (the hardware is limited, please do not exceed this time.)